COMMERCIAL FLOOR CARE • MEDFORD AND JACKSON COUNTY, OREGON
Commercial Floor Stripping and Waxing Built Around What Your Floor Needs
Professional commercial floor stripping and waxing in Medford and throughout Jackson County, Oregon. We help businesses protect their existing floors with the right level of care—from new VCT preparation and waxing to routine maintenance, scrub-and-recoat service, and full stripping and waxing when worn-out finish needs replacing.

Local and family owned since 1991
35+ years of cleaning experience
Serving Jackson County
Honest, no-pressure recommendations
PROTECT THE FLOOR YOU ALREADY HAVE
A Well-Maintained VCT Floor Can Last for Decades
VCT is built for a long service life, but the surface needs protection. The wax is there to take the daily wear from foot traffic, soil, rolling equipment, spills, and routine use so the flooring underneath doesn’t have to.
Keeping that wax in good condition can help the original VCT stay attractive and serviceable for decades.
Let the wax take the beating, not the floor.

THE RIGHT CARE AT THE RIGHT TIME
The Best Time to Maintain a Floor Is Before It Looks Worn Out
We inspect the floor and recommend the best method for its condition, traffic, existing wax, and the way your facility is used. The goal is to keep the floor protected and looking good instead of waiting until it needs major restoration.
New VCT Prep & Wax
Newly installed VCT typically comes with a light factory coating that needs to be removed before the floor is waxed for normal use. We clean and prepare the new tile, remove the factory coating, and apply the protective wax the floor needs from the start.
- Removes the temporary factory coating
- Prepares newly installed VCT for service
- Typically receives 4–5 coats of high-quality wax
- Protects the floor from the beginning
Routine Floor Care
Regular cleaning removes soil before it becomes embedded in the wax and helps keep the floor looking better between periodic floor-care services.
- Removes everyday soil
- Helps protect the existing wax
- Keeps appearance more consistent
- Helps reduce unnecessary wear
Scrub & Recoat
When the wax is becoming dirty or worn but the entire wax system does not need to be removed, we deep scrub the floor, take off the top layer of dirty and worn wax, and replace it with fresh wax.
- Removes dirty and worn surface wax
- Adds fresh protective wax
- Brings back appearance before the floor gets badly worn
- Returns to service much faster than a full strip and wax
- Typically costs less than a full strip
- Helps extend the time between full strip-and-wax jobs
Full Strip & Wax
When the existing wax has reached the point where routine maintenance or a scrub and recoat is no longer enough, we remove the worn-out wax and replace it with a completely new wax system.
- Removes old wax and buildup
- Provides a clean starting point
- Typically receives 4–5 coats of high-quality wax
- Restores protection and appearance
SMARTER LONG-TERM FLOOR CARE
Maintain More. Strip Less.
The best time to maintain a waxed floor is before it looks like it desperately needs attention.
Regular cleaning and timely scrub-and-recoat service help keep the floor looking consistently better instead of allowing the wax to become heavily worn, dirty, and uneven while waiting for the next full strip and wax.
More frequent maintenance removes worn surface wax and replaces it with fresh wax before deterioration reaches the point where everything has to come off.
That can mean better-looking floors throughout the year, less downtime, lower long-term floor-care costs, and fewer major restoration projects.
Annual stripping is a common rule of thumb for commercial VCT, but a floor on a strong maintenance program may not need to be fully stripped every 12 months. Regular cleaning and timely scrub-and-recoat service can extend the life of the existing wax system and push a full strip much farther out. We base the timing on the actual floor condition, traffic, and maintenance history—not the calendar alone.
OUR PROCESS
A Thorough Strip & Wax From the Floor Up
When full stripping and waxing is the right choice, we remove the worn-out wax, thoroughly prepare the floor, and apply fresh protective wax in multiple coats.
1. Inspect
We evaluate the flooring, existing wax, traffic patterns, condition, and problem areas before the work begins.
2. Strip & Clean
The old wax and buildup are removed and the floor is thoroughly cleaned, rinsed, and prepared for new wax.
3. Inspect the Clean Floor
Once the old wax is removed, we inspect the exposed floor before applying the new wax finish.
4. Apply New Wax
We typically apply 4–5 coats of high-quality commercial wax, allowing approximately 30–45 minutes between coats as conditions allow.
5. Dry, Cure & Return to Service
We allow each coat to dry before applying the next and use air-moving fans when appropriate to support drying.
After the final coat, overnight—about 12 hours—is our preferred return-to-service window whenever the facility schedule allows. Most projects are completed in one visit; larger facilities may be completed over multiple work periods or in sections.
COMMERCIAL FLOOR CARE WITH LESS DISRUPTION
We Plan the Work Around Your Facility Schedule
Commercial stripping and waxing is typically scheduled during closure periods, evenings, or other low-use times so the work can be completed with less disruption and the new wax has time to dry and cure.
During the walkthrough, we consider access, traffic, floor layout, facility hours, and return-to-service needs before planning the work.
Larger projects can often be completed in sections when the facility cannot be taken completely out of service.

MORE THAN VCT
Care for VCT and Other Resilient Commercial Floors
VCT is the floor most commonly associated with commercial stripping and waxing. We can also evaluate other resilient commercial floors, including sheet vinyl and linoleum, and recommend the appropriate cleaning or maintenance approach.
Different floors require different care. We choose the cleaning and maintenance method based on the specific flooring and the manufacturer’s recommendations rather than treating every resilient floor the same way. For an example of manufacturer guidance, see Armstrong Flooring’s VCT maintenance overview.
Some resilient floors are deep cleaned rather than waxed.
FLOOR CARE THAT FITS YOUR FACILITY
Restore a Worn Floor—or Keep It From Getting There
If the floor already needs major attention, we can handle the full stripping and waxing needed to restore it.
If you want to keep it looking better throughout the year, we can also build ongoing floor maintenance around your traffic, facility schedule, flooring, and existing wax.
The goal is not simply to make the floor shine on cleaning day. It is to keep the wax protecting the floor and keep the facility looking well cared for between major services.
★★★★★
“Jeremy is one of the hardest working guys in this valley. He’s so thorough and diligent, it’s as if he lives to make you happy, and he does! Thanks so much Jeremy!”
— SOV Logistics
Google Review
READY FOR BETTER-LOOKING, BETTER-PROTECTED FLOORS?
Start With a Commercial Floor Walkthrough
We’ll look at the flooring, existing wax, condition, traffic, facility schedule, and maintenance goals, then recommend whether maintenance, scrub and recoat, or stripping and waxing makes the most sense for your facility.
Frequently Asked Questions
How much does commercial floor stripping and waxing cost?
Commercial floor stripping and waxing is custom quoted because every facility is different. Pricing depends on square footage, flooring type, existing wax, condition, buildup, access, scheduling requirements, and the amount of work needed. A walkthrough lets us inspect the floor and provide a clear scope and quote.
How often should VCT floors be stripped and waxed?
Annual stripping is often used as a general starting point, but it is not necessary for every floor. With regular cleaning and timely scrub-and-recoat service, a well-maintained VCT floor may go much longer than 12 months before a full strip is needed. We recommend stripping based on the floor’s actual traffic, condition, existing wax, and maintenance history—not simply the calendar.
How do I know whether my floor needs a scrub and recoat or a full strip and wax?
If the existing wax is still in good enough condition, a scrub and recoat can remove the top layer of dirty or worn wax and replace it with fresh wax. When the old wax needs to be completely removed and replaced, a full strip and wax is the better choice. We inspect the floor before recommending either service.
Is a scrub and recoat faster than a full strip and wax?
Yes. Because we are not removing all of the existing wax or rebuilding the entire wax system, a scrub and recoat can usually be completed and returned to service much faster than a full strip and wax.
How many coats of wax do you apply?
A full VCT strip and wax typically receives 4–5 coats of high-quality commercial wax. The exact number can vary depending on the floor and the needs of the facility.
How long before the floor can be walked on after waxing?
Each coat needs time to dry, and the completed floor also needs time for the wax to cure. We prefer approximately 12 hours before normal return to service whenever possible. We also use air-moving fans during the waxing process when appropriate to help speed drying between coats.
Can stripping and waxing be done after hours?
Yes. Most commercial floor-care projects are scheduled during closure periods, evenings, or other low-use times to reduce disruption and give the new wax time to dry and cure.
Can regular maintenance reduce how often the floor needs to be stripped?
Yes. Regular cleaning and timely scrub-and-recoat service can remove worn surface wax and replace it before the entire wax system needs to be stripped away. This can help keep the floor looking better throughout the year while extending the time between full strip-and-wax projects.
Do newly installed VCT floors need wax?
Yes. Newly installed VCT typically has a light factory coating that needs to be removed before the floor is waxed for normal service. We prepare the new tile, remove the factory coating, and apply the protective wax system needed to help protect the floor from the start.
Why is there a large yellow or discolored square in my VCT?
One possible cause is certain rubber-backed or vinyl-backed floor mats. Some mats release chemicals or plasticizers that can migrate through the wax and into the VCT itself, leaving a yellow or discolored area that follows the shape of the mat.
Because the discoloration can penetrate into the tile rather than remaining in the wax, stripping and rewaxing usually will not remove it. In many cases the staining is permanent, and replacing the affected tile may be the only way to completely correct the appearance.
How long can VCT flooring last?
Properly maintained VCT can remain in service for decades. The wax acts as a replaceable protective layer that takes much of the wear from traffic and everyday use. Keeping the wax maintained helps protect the flooring underneath and can greatly extend its usable life.
A More Complete Clean for Your Facility
Commercial Janitorial Cleaning
Keep routine soil and daily wear under control between periodic floor-maintenance services.
Commercial Carpet Cleaning
Professional carpet maintenance for offices, hotels, medical facilities, and other commercial spaces.
Commercial Tile & Grout Cleaning
Deep cleaning for commercial tile and grout where routine mopping is no longer enough.
